Demetz, M. (2007). Software modules for an electrochemical measurement system [Diploma Thesis, Technische Universität Wien]. reposiTUm. https://resolver.obvsg.at/urn:nbn:at:at-ubtuw:1-95144
Diese Diplomarbeit befasst sich mit der Erstellung von Software Komponenten für die Steuerung und Durchführung von Messaufgaben in einem komplexen System von elektrochemischen Messgeräten. Viele solche Messaufgaben erfordern eine koordinierte Zusammenarbeit von Geräten verschiedenster Hersteller. Dies ist eine groÿe Herausforderung für diejenigen, die die Messabläufe durchführen und überwachen. Die meisten Geräte werden mit einer Steuerungssoftware geliefert welche sich jedoch im groÿteil der Fälle auf die Funktionen des Gerätes beschränkt. Im Rahmen dieser Diplomarbeit werden Software Komponenten vorgestellt, die sich im wesentlichen auf die Zusammenarbeit von mehreren Messinstrumenten konzentriert welche mit herkömmlichen Programmen nahezu unrealisierbar ist. Das Hauptaugenmerk der vorgestellten Software Komponenten ist das dynamische Einbinden von neuen Geräten ohne das bestehende System zu verändern. Die Erstellung solcher Module, sowie die Interpretation und Ausführung von Messaufgaben und der Frameworks die dafür zur Verfügung stehen werden dieser Arbeit besprochen.
de
This thesis deals with the creation of software components for the control and execution of measurement tasks in a complex system of elechtrochemical instruments. Many of these measurements require a coordinated cooperation between instruments and measurement devices of dierent vendors. This is a big challenge for all those who execute and observe the measurement tasks. Many of these instruments are shipped out with an additional software in order to facilitate complicated settings on the front panel of such an instrument. In most cases, such programs only support the functions of the instrument self. The work of this thesis presents software components which focus on the cooperation between the instruments. This is the point where many of the existing software begin to fail. The main aspect of these components is the dynamic embedding of new instruments without the need to change the existing system. The creation of the integration modules as well as the interpretation and execution of measurement tasks and the supporting frameworks are discussed in this work.