E212-02 - Forschungsbereich Stahlbeton- und Massivbau
-
Journal:
Structural Concrete
-
ISSN:
1464-4177
-
Date (published):
2021
-
Number of Pages:
12
-
Peer reviewed:
Yes
-
Keywords:
Mechanics of Materials; General Materials Science; Building and Construction; Civil and Structural Engineering; high-strength reinforcement; joint reinforcement; longitudinal joint; precast tunnel segments; tubbing
-
Abstract:
Continuous tunneling using a tunnel-boring machine is a very popular method when it comes to the construction of large tunnel projects. The use of precast reinforced concrete elements, called tubbings, is a highly economical way to secure the tunnel post excavation. Unfortunately, a loss of the load-bearing capacity has been observed in the past in the joints between the tubbings. Reasons for that are among others the required reduction of the cross section in the longitudinal joint area and, above all, the high normal compressive forces that arise due to soil pressure. This paper describes experimental testing of longitudinal joints of tubbings conducted at TU Wien. The increase of the loadbearing capacity of a newly designed and optimized tubbing with high-strength joint-compressive reinforcement, which was developed and patented by the Institute of Structural Engineering at TU Wien, is presented. The high-strength
steel is characterized by its high yield strength of 670 MPa, as well as the very large available bar diameters of up to 75 mm. This new optimized tubbing enables the production of thinner tubbings compared to conventional designs, and can thus achieve a reduction in material, transport and excavation costs.
en
Research Areas:
Efficient Utilisation of Material Resources: 50% Structure-Property Relationship: 30% Modelling and Simulation: 20%