Forschung auf den Gebieten der drahtlosen Datenübertragung und der Mobilkommunikation wird vielfach mit Hilfe von Simulationen betrieben. Man verwendet diese, um die Performance sowie die korrekte Funktionalität von neu entwickelten Algorithmen zu vergleichen beziehungsweise zu überprüfen. Trotzdem ist es in manchen Fällen hilfreich, die Eigenschaften von drahtlosen Übertragungsverfahren anhand von Messungen in einem realen Szenario zu untersuchen. Dies kann vor allem in Situationen, in denen eine Simulation zu aufwändig oder nicht machbar wäre, genauere Einblicke in das Verhalten von Algorithmen und Übertragungsverfahren geben. Diese Arbeit beschreibt den Aufbau, die Implementierung und die Veri kation eines Systems zur Durchführung von Messungen und zur Charakterisierung von Eigenschaften drahtloser Übertragungsverfahren, basierend auf einem bestehenden Aufbau eines MIMO Testbeds am Institute of Telecommunications an der Technischen Universität Wien. Um den Anforderungen heutiger Standards in der mobilen Kommunikation gerecht zu werden, müßte das bestehende System angepasst werden. Im Rahmen dieser Arbeit werden alle Elemente, die benötigt werden um Messungen solcher Art durchzuführen, erklärt. Weiters wird die Software, die zur Durchführung von Messungen sowie zur Auswertung der Messdaten entwickelt wurde, beschrieben. Das aufgebaute Testbed wird im Hinblick auf SINR und Datendurchsatz mit Hilfe eines LTE-Signals charakterisiert. Die Messergebnisse werden mit Simulationen verglichen, um die korrekte Funktion des Testbeds zu verizieren.
Research in wireless data transmission and mobile communication is often based on simulations. Using such simulations one can compare the performance and verify the correct operation of developed algorithms and transmission schemes. Nevertheless, real-world performance measurements of wireless communiations techniques might give further insights and may help at investigating transmission scenarios where simulation is not feasable up to now. This work deals with the set-up, implementation and verication of a system for carrying out real-world measurements on wireless data transmission schemes. Based on an existing wireless multiple input - multiple output (MIMO) testbed developed at the Institute of Telecommunications of the Vienna University of Technology, a redesign of the existing setup was necessary for being able to carry out measurements on today's mobile communication standards. Within this work all major parts the wireless testbed consists of will be described. Furthermore, a description of all software implemented for carrying out measurements is given. The testbed is characterized in terms of signal to interference and noise ratio (SINR) and data throughput using a Long Term Evolution (LTE) signal. The obtained measurement results are compared with simulations to verify the correct operation of the involved hardware and software.