Sedlar, J. (2008). Management of the installation of a large hydro power plant [Diploma Thesis, Technische Universität Wien]. reposiTUm. http://hdl.handle.net/20.500.12708/182026
28,1 MVA Vertical Three-Phase Synchronous Generator with Direct-Current Exciter, Pilot Exciter, Governor Generator and associated equipment, driven by a 20,6 MW Francis Type Water Turbine (Head 35 - 80 metres, Speed 250 rpm) for Set No. 2 of Lar Dam und Tunnel Project, LATIYAN POWER STATION (former Farahnaz Pahlavi Power Station), Hydro-Electric Plant of Tehran Regional Water Board Shareholders Company, Islamic Republic of Iran.ELIN-UNION AG was the main contractor and had automatically the leadership towards the turbine manufacturer.Tehran Regional Water Board started from the principle, that machine-set No. 2 as close as possible in performance and quality to machine-set No. 1 will take precedence.Clarification and finalize of all outstanding technical points relating to the Tenders received for Contracts were necessary.The description of the machine and instructions for assembly, setting the machine in operation and maintenance, were written especially for the specific generator supplied by ELIN-UNION AG. If therefore couldn´t take all the safety measures and the instructions for the operations of the generator into consideration. It describes only the main points which should be especially on this generator, in a summarized form. All responsibilities for damage resulting from inappropriate handling and wrong operational execution were explicitly rejected.The personnel should be well trained and they had been keeping the machine under continuous supervision.The operating instructions could in no way replace the training of operational personnel.During the guarantee period, proper care and maintenance of the machine was also the client´s duty. All discrepancies should be reported to the supplying company ELIN-UNION AG.Disassembly, also of individual parts, could only be carried out with the agreement of the supplying company.
