Unger, M. (2024). Lineare analog modulierbare Laserquelle [Diploma Thesis, Technische Universität Wien]. reposiTUm. https://doi.org/10.34726/hss.2024.114440
Laser source; Analog; Linear; Optical sensor data transmission; MRI
en
Abstract:
This diploma thesis is part of the Optimal project, which is dedicated to the developmentof a system for wireless optical free-space transmission of data within a magnetic resonancetomograph (MRT). In order to optically transmit the data generated in the MR coils,a linear analog modulable laser source was developed in this thesis. The laser driver supplies the laser diode with a direct current to ensure an optical output power of 1mW. A modulation signal at 123MHz is supplied via a bias tee. One challenge is the layoutdesign of the bias tee, which must be adapted for a characteristic impedance of 50Ωto avoid reflection and optimise signal quality and integrity. The iC-HT, an integrated component from iC-Haus that already includes safety precautions for the operation of laser diodes, is used as the laser driver.In addition, the temperature dependent behaviour of the laser diode is investigated, as the operating characteristics are strongly influenced by the temperature. Temperature control is implemented in order to be able to precisely regulate the temperature and thus measure changes in operation as a function of temperature. The entire system is controlled via an Arduino Nano, for which a parser was implemented that correctly decodes an SCPI (Standard Commands for Programmable Instruments)-like instruction set. This enables the specific adjustments and monitoring of the operating point of the laser diode and the control parameters of the temperature control. The measurements performed show that the developed system achieves a −3dB band-width of about 250MHz, ensuring sufficient headroom for modulation at 123MHz. Thanks to the careful adjustment of the RF path, reflection could also be minimised and the signal quality optimised. The results also make it clear that precise temperature stabilisation is crucial in order to ensure the constant performance of the laser diode and reliably guarantee the quality of optical data transmission even under changing operating conditions.
en
Additional information:
Zusammenfassung in englischer Sprache Abweichender Titel nach Übersetzung der Verfasserin/des Verfassers