Rusnov, B., & Deix, K. (2026, September 16). Reinforcement of existing stone buildings to improve earthquake resistance [Conference Presentation]. 18th European Conference on Earthquake Engineering, Berlin, Germany.
E207-01 - Forschungsbereich Baustofflehre und Werkstofftechnologie
-
Date (published):
16-Sep-2026
-
Event name:
18th European Conference on Earthquake Engineering
en
Event date:
14-Sep-2026 - 18-Sep-2026
-
Event place:
Berlin, Germany
-
Keywords:
stone house; earthquake; masonry; historic buildings
en
Abstract:
Stone houses in earthquake zones are particularly vulnerable due to their construction and often need to be reinforced. An analysis was carried out based on an existing stone building in Makarska, Croatia. This building has a total of five above-ground floors, with dimensions of 10 m on the narrow side and 21 m on the street side. The ceilings are made of wooden beams and the walls are made of 30-50 cm thick regular limestone masonry. These were mostly laid in blocks without mortar. The relatively high building height combined with a small ground layout was common at that time on the Dalmatian coast in narrow neighborhoods.
The seismic safety improvements are achieved by reinforcing the ceiling structures with rigid reinforced concrete slabs that replace the tram ceilings. Several variants are being investigated, varying the number and floor-by-floor location of the ceiling reinforcements. In addition to the current state, five variants with different ceiling reinforcements are being considered. The first step was to perform numerical modeling of the existing and reinforced building structure, followed by a push-over analysis in accordance with EN 1998-3 for all variations.
The earthquake compliance factor α is of central importance and depends significantly on the building geometry and the strength and stiffness of the walls and ceilings. Furthermore, the calculations show the first structure to fail and thus the weakest point that is decisive for earthquake resistance. The question of whether and with what ceiling reinforcements earthquake safety can be increased is then addressed, and in particular how much this increases the load on the stiffening stone walls. In this case, these stone walls would also have to be reinforced with concrete faced shells.
en
Research Areas:
Materials Characterization: 50% Modeling and Simulation: 50%