<div class="csl-bib-body">
<div class="csl-entry">Mayr-Harting, G. (2016). <i>Strömungstechnische Nachrechnung einer zweiwelligen Kleingasturbine und Entwicklung einer Leistungssteuerungseinrichtung</i> [Diploma Thesis, Technische Universität Wien]. reposiTUm. https://doi.org/10.34726/hss.2016.28028</div>
</div>
-
dc.identifier.uri
https://doi.org/10.34726/hss.2016.28028
-
dc.identifier.uri
http://hdl.handle.net/20.500.12708/6003
-
dc.description
Zusammenfassung in englischer Sprache
-
dc.description
Abweichender Titel nach Übersetzung der Verfasserin/des Verfassers
-
dc.description.abstract
Im Besitz des Autors befinden sich zwei Kleingasturbinen des Typs Rover 2S/150 aus dem Jahr 1965. Diese zweiwelligen Maschinen sind für den Betrieb bei konstanten Drehzahlen ausgelegt. Für die geplante Anwendung als Fahrzeugantrieb beziehungsweise als Prüfstandmaschine soll eine Leistungssteuerungseinrichtung entwickelt werden. Von den Maschinen sind nur wenige Strömungsgrößen bekannt, wie der maximale Massenstrom und die maximalen Turbinenaustritts- und eintrittstemperaturen. Bei einer Revision der Maschinen wurden alle relevanten geometrischen Größen aufgenommen. Mit diesen Abmessungen und den bekannten Daten der Strömung wurde eine eindimensionale Strömungsberechnung durchgeführt. Das Ergebnis sind Geschwindigkeitsdreiecke für den Verdichter, die Gasgeneratorturbine und die Nutzleistungsturbine. Das Kraftstoffsystem wurde nach Herstellervorgaben auf Funktionstüchtigkeit geprüft. Anhand des erwarteten Brennstoffvolumenstroms wurde ein Nadelventil für die Steuerung der Kraftstoffmenge ausgewählt und als Regelventil des Rücklaufes getestet. Es wurde der minimal erforderliche Einspritzdruck ermittelt, bei dem es voraussichtlich zum Verlöschen der Flamme kommt. Die gewonnenen Erkenntnisse wurden für den realen Anwendungsfall als Kraftfahrzeugantrieb umgesetzt und in Fahrversuchen getestet.
de
dc.description.abstract
In the possession of the author are two small gas turbines made by Rover, type 2S/150. Those two-shaft engines are designed to run at constant speed. For the intended use as vehicle power plant and as laboratory test bed, a power control is to be developed. Little technical data are known about the fluid flow through the engines, such as the maximum mass flow and the maximum turbine inlet and outlet temperatures. During an overhaul of one of the engines, all relevant dimensions were recorded. Using the data collected as mentioned above, a one-dimensional flow calculation was performed. The results of this calculation are velocity triangles for the compressor, the gas generator turbine and the free power turbine. Using service guidelines from the manufacturer, the components of the fuel system were tested for their serviceability. For the purpose of controlling the fuel flow, a suitable needle valve was selected for the expected fuel mass flow and fitted into the low pressure return line. The minimum required fuel pressure to prevent the extinguishment of the flame was determined. The knowledge gained through the tests mentioned above was put into practice by fitting the developed power control unit to one engine. This gas turbine was then mounted into a car and subsequently road tested.
en
dc.language
Deutsch
-
dc.language.iso
de
-
dc.rights.uri
http://rightsstatements.org/vocab/InC/1.0/
-
dc.subject
Kleingasturbine
de
dc.subject
Leistungssteuerungseinheit
de
dc.subject
Micro Gas Turbine
en
dc.subject
Power Control Unit
en
dc.title
Strömungstechnische Nachrechnung einer zweiwelligen Kleingasturbine und Entwicklung einer Leistungssteuerungseinrichtung
de
dc.title.alternative
Fluid dynamic calculation of a small two-shaft gas turbine and development of a power control unit
en
dc.type
Thesis
en
dc.type
Hochschulschrift
de
dc.rights.license
In Copyright
en
dc.rights.license
Urheberrechtsschutz
de
dc.identifier.doi
10.34726/hss.2016.28028
-
dc.contributor.affiliation
TU Wien, Österreich
-
dc.rights.holder
Georg Mayr-Harting
-
dc.publisher.place
Wien
-
tuw.version
vor
-
tuw.thesisinformation
Technische Universität Wien
-
tuw.publication.orgunit
E302 - Institut für Energietechnik und Thermodynamik