Notice
This item was automatically migrated from a legacy system. It's data has not been checked and might not meet the quality criteria of the present system.
Pfützner, H., Futschik, K., Hamberger, P., & Aigner, M. (2012). Concept for More Correct Iron Loss Measurements Considering Path Length Dynamics. In Short Paper Proceedings (pp. 24–25). http://hdl.handle.net/20.500.12708/73146
International Workshop on 1&2 Dimensional Magnetic Measurement and Testing
-
Event date:
10-Sep-2014 - 12-Sep-2014
-
Event place:
Torino, Italy, EU
-
Number of Pages:
2
-
Peer reviewed:
No
-
Abstract:
As well known, iron losses p can be determined through the time integral over the field H and the derivative of the induction B. While Japanese methods determine H in a direct way, most labs prefer single sheet testers (SSTs) or Epstein testers (ETs) where H of the quasi-homogenic magnetized sample section is assumed to be proportional to the magnetization current i. However, this proportionality ...
As well known, iron losses p can be determined through the time integral over the field H and the derivative of the induction B. While Japanese methods determine H in a direct way, most labs prefer single sheet testers (SSTs) or Epstein testers (ETs) where H of the quasi-homogenic magnetized sample section is assumed to be proportional to the magnetization current i. However, this proportionality does not exist due to the periphery - the yoke of SST and the corners of ET, respectively. Usually, the periphery is considered through an effective magnetic path length I_{M} as a function of the peak induction B_{PEAK}. However, in special for grain oriented materials, the periphery represents a 3-D phenomenon which shows dynamic modifications in a periodical way. As a new approach, this is considered through a path length function Λ#(t) which is determined for each grade of material in a calibration process by means of a tangential field coil. Implementation in the process of measurement is simple. However, the usual electro-dynamic wattmeter has to be replaced by numerical integration. More correct results are expected for both SST and ET.
