In-Line Ultrasound-Enhanced Raman Spectroscopy Allows for Highly Sensitive Analysis with Improved Selectivity in Suspensions

Abstract

Raman spectroscopy is a nondestructive characterization method offering chemical-specific information. However, the cross-section of inelastically (Raman) scattered light is very low compared to elastically (Rayleigh) scattered light, resulting in weak signal intensities in Raman spectroscopy. Despite providing crucial information in off-line measurements, it usually is not sensitive enough for efficient, in-line process control in conjunction with low particle concentrations. To overcome this limitation, two custom-made 1.4404 stainlesssteel prototype add-ons were developed for in-line Raman probes that enable ultrasound particle manipulation and thus concentration of particles in suspensions in the focus of the Raman excitation laser. Depending on size and density differences between particles and the carrier medium, particles are typically caught in the nodal planes of a quasi-standing wave field formed in an acoustic resonator in front of the sensor. Two arrangements were realized with regard to the propagation direction of the ultrasonic wave relative to the propagation direction of the laser. The parallel arrangement improved the limit of detection (LOD) by a factor of ≈30. In addition to increased sensitivity, the perpendicular arrangement offers increased selectivity: modifying the frequency of the ultrasonic wave field allows the liquid or solid phase to be moved into the focus of the Raman laser. The combination of in-line Raman spectroscopy with ultrasound particle manipulation holds promise to push the limits of conventional Raman spectroscopy, hence broadening its field of application to areas where previously Raman spectroscopy has not had sufficient sensitivity for accurate, in-line detection.