Hofer, K., Werkovits, S., Schönauer, P., Mirwald, J., Grothe, H., & Hofko, B. (2023). Chemical and mechanical analysis of field and laboratory aged bitumen. Road Materials and Pavement Design. https://doi.org/10.1080/14680629.2023.2180297
Bitumen; long-term aging; DSR; FTIR; SARA fractions; Fluorescence spectroscopy
en
Abstract:
To predict the performance of bituminous products during their service life, an accurate simulation of the aging behaviour is required. Several laboratory methods are available, yet the correlation to field aging is mostly missing. In this study, an unmodified bitumen was exposed to laboratory aging with the Pressure Aging Vessel (PAV) using one to five aging cycles and the Viennese Binder Aging (VBA) method, followed by a comparison to a field sample of the same base binder. Measurements with the dynamic shear rheometer (DSR) and Fourier-transform-infrared (FTIR) spectroscopy showed that the field aging level could not be reached neither with VBA nor with multiple PAV cycles, but a better approximation compared to the standard aging procedure was achieved. The FTIR spectra displayed a high degree of correlation between the VBA and field aged sample, especially regarding carbonyl formation in the aromatic fraction and the intensity of the sulphoxide band in the resin and asphaltene fractions. Additionally, the VBA sample showed more similarities to the field sample regarding fluorescence excitation–emission maps. Although both laboratory aging methods are an improvement to the standard procedure, the VBA method allowed for a better qualitative simulation of the chemical properties of the investigated field sample.
en
Research Areas:
Special and Engineering Materials: 50% Materials Characterization: 50%
