Obermayr, B. (2009). Mauerwerkssicherungen durch Einsatz von Aramidstäben und Kunstharzinjektionen und deren Vor- und Nachteile in der Denkmalpflege [Diploma Thesis, Technische Universität Wien]. reposiTUm. http://hdl.handle.net/20.500.12708/184748
In dieser Diplomarbeit werden die Möglichkeiten und Problematiken der Mauerwerkssicherung im Bestand beschrieben. Weiters wird erörtert inwieweit sich diese mit den Vorstellungen der modernen Denkmalpflege vereinbaren lassen. Besonders die vergleichsweise junge Technik der Vorspannung mit Aramidfaserstäben und Kunstharzinjektionen wird dabei hervorgehoben. Vorspannungen dienen dem druck- und schubfesten Zusammenfügen von Mauerwerk und Pfeilern. Zugspannungen, die das Mauerwerk nicht aufnehmen kann, werden von den Spannglieder übernommen. Das Material Aramid bietet gegenüber dem üblicherweise eingesetzten Stahl unter anderem die Vorteile der Korrosionsbeständigkeit und der höheren Festigkeit bei geringerer Dichte. Neben der Schilderung der technischen Durchführung beziehungsweise der Variationsmöglichkeiten dieser Technik, der chemischen Zusammensetzung, des möglichen Alterungsverhaltens und den Beobachtungen an bereits ausgeführten Projekten werden deren Vor- und Nachteile aus denkmalpflegerischer Sicht diskutiert. Abschließend wurde mittels Ausziehversuchen an einem Mauerwerk die Haftung über den Verbund, die bei dieser Technik ausschlaggebend ist, da sie das Weglassen größerer Verankerungsbereiche erlaubt, überprüft und die Ergebnisse interpretiert.
This thesis describes the technical options and associated problems of securing antique masonry. It discusses how these techniques can be combined with the theory and concept of present day preservation of ancient monuments, focusing on the relatively new technique of inserting pre-stressed aramid rods and securing them to the masonry with injected synthetic resins. With this method tensile stresses, which are not tolerated by masonry, are transferred to the tensile rods. Aramid, because of its resistance to corrosion and a relatively greater strength to weight ratio, is considered to be superior to the generally used steel. In addition to the description of the technical procedures and their variations, it discusses the chemical compounds and their potential aging processes. The thesis cites a variety of already completed projects, as well as discussing the pros and cons of this new technique in these specific application. Finally, an adhesion test of the composite, facilitated by the fact that it does not require a large anchorage area, is described, and the results are interpreted.
en
Additional information:
Abweichender Titel laut Übersetzung der Verfasserin/des Verfassers Zsfassung in engl. Sprache