High-Prandtl-number thermocapillary liquid bridges with dynamically deformed interface: effect of an axial gas flow on the linear stability

Abstract

The linear stability of the axisymmetric steady flow in a thermocapillary liquid bridge made from 2-cSt silicone oil (Pr = 28) is investigated numerically. The liquid bridge is heated either from above or below and exposed to an axial air flow which is confined to a concentric tube surrounding the bridge. At the annular inlet, the air flow is fully developed and has the same temperature as the adjacent support rod. Using an extended Oberbeck–Boussinesq approximation in which the density of both fluids depends linearly on the temperature in all equations, critical thermocapillary Reynolds numbers are obtained depending on the strength of the imposed axial air flow. The critical conditions are sensitive with respect to the direction of a weak air flow, because the air flow changes the plateau value of the interfacial temperature midway between the hot and cold ends. For stronger air flow the critical thermocapillary Reynolds number almost saturates at moderate values. Throughout, the instability arises as a hydrothermal wave with the gas phase being passive. The dynamic interface deformations for axisymmetric flow caused by the thermocapillarity flow in the liquid and by the stresses from the air flow are considered separately. Apart from turning points of the critical curve, the impact of dynamic surface deformations on the critical thermocapillary Reynolds number is moderate.