Laggner, P., Hedjri-Peyfuß, G., & Mad, H. (2026, October 27). A multi-stage Gearbox for Plug-In Hybrid Aircraft Propulsion with Unrestricted Airflow [Poster Presentation]. 16th EASN International Conference, Toulouse, France.
E307-02 - Forschungsbereich Maschinenelemente und Luftfahrtgetriebe E307-06 - Forschungsbereich Luftfahrzeugsysteme
-
Date (published):
27-Oct-2026
-
Event name:
16th EASN International Conference
en
Event date:
27-Oct-2026 - 30-Oct-2026
-
Event place:
Toulouse, France
-
Keywords:
Hybrid electric propulsion; Gearbox design; Plug-in hybrid aircraft; Hybrid electric flight
en
Abstract:
Plug-in hybrid-electric propulsion (PHEP) can reduce the emissions of short-haul flight, but it needs a drivetrain that is light, efficient and able to split power between a propeller and electric machines. This gearbox is designed for a 250-seat PHEP aircraft with a gas turbine as range extender, developed within the DLR project EXACT.
The gearbox couples the low-pressure turbine to three generator/motor shafts and a constant-speed propeller. Its design is novel in that it is built around the engine inlet: the first gear sits on the outside of the inlet, so the airflow stays unobstructed and no S-duct is required. S-ducts are typically accompanied by higher inlet losses, which this design avoids. A freewheel decouples the turbine for fully electric operation.
The gearbox was modelled in FVA-Workbench. The safety factors for tooth root and tooth flank are above 1.65 according to ISO 6336, and the Hertzian contact stresses in the bearings are below 1900 N/mm².
en
Research Areas:
Sustainable and Low Emission Mobility: 50% Modeling and Simulation: 25% Computational System Design: 25%