Jetzinger, M. (2017). Herstellung von PM-Stahl mit druckwasserverdüsten C-Masteralloys [Diploma Thesis, Technische Universität Wien]. reposiTUm. https://doi.org/10.34726/hss.2017.45634
In der Arbeit wird gezeigt, dass Kohlenstoff in pulvermetallurgische Stähle nicht nur als Graphit. sondern auch als hochkohlenstoffhaltige Fe-C-Masteralloy eingebracht werden kann. Durch Hochdruckwasserverdüsung hergestellte feine Masteralloy-Pulver müssen nicht notwendigerweise weichgeglüht werden, sondern können sogar im verdüsten Zustand zu Reineisenpulver zugemischt werden. Wesentlich ist homogene Einmischung der Masteralloy-Pulver
de
In the present thesis it is shown that carbon can be added to PM steels not only as graphite but also through high-C masteralloys. These can be produced through high pressure water atomization and need not be soft annealed but can be admixed to plain iron base powder as delivered. Homogeneous admixing is however essential.
en
Additional information:
Abweichender Titel nach Übersetzung der Verfasserin/des Verfassers