Pichler, M. (2012). Outdoor temperature coefficient of different PV module technologies at ABD-plant in a one-year period [Diploma Thesis, Technische Universität Wien]. reposiTUm. https://resolver.obvsg.at/urn:nbn:at:at-ubtuw:1-58107
outdoor temperature coefficient; CIGS; CdTe; crystalline silicon; amorphous silicon
en
Abstract:
Für die Untersuchungen wurden die Daten von der ABD-Anlage (ABD - airport bolzano dolomiti) in Bozen begutachtet. Diese Arbeit betrachtet die Temperaturabhängigkeit bei drei verschiedenen Einstrahlungsintensitäten der meisten kommerziell verfügbaren Technologien in der Photovoltaik. Temperaturkoeffizienten für Strom, Spannung und Leistung wurden für die genannten Technologien bestimmt.<br />Die Laborwerte der Temperaturkoeffizienten zeigen für alle Technologien dieselbe Tendenz (positiv für den Strom und negativ für Spannung und Leistung). Allerdings können diese Werte stark unterschiedlich sein bei Verwendung von Outdoor-Daten, wo die STC-Bedingungen in der Regel nicht erreicht werden. Die Resultate dieser Arbeit zeigen klar, dass Outdoor-Messungen in Kombination mit Labormessungen dringend gebraucht werden, um das Verhalten der verschiedenen Technologien im Außeneinsatz besser zu verstehen und um die Energieproduktion unter realen Bedingungen der betrachteten Technologien zu verbessern.<br />
de
To perform the necessary outdoor investigations, data acquired at the ABD-plant (ABD - airport bolzano dolomiti) in Bolzano has been examined. This work considers the temperature dependence at three different irradiance levels of the majority of commercially available PV technologies. Temperature coefficients for current, voltage and power are derived as parameters. For indoor measurements, which are performed at standard test conditions, all technologies show the same tendency for the temperature coefficients (positive for the current and negative for voltage and power). However, they can strongly differ from coefficients determined in outdoor measurements, where the standard test conditions are often not matched. The results of this work clearly show that outdoor measurements are strongly needed in combination with indoor experiments to better estimate and understand outdoor behavior of PV technologies and hence to improve the technologies in order to have higher energy production in realistic conditions.