Reichel, M. (2020). Faulung bei hohen Feststoffgehalten. In Kapazitätserweiterung von Kläranlagen : ÖWAV-Seminar, Wien 2020, TU Wien, 26.-27. Februar 2020 (pp. 199–238). TU, Institut für Wassergüte und Ressourcenmanagement. https://doi.org/10.34726/wim.232
In dieser Arbeit wird das Potential der anaeroben Schlammstabilisierung dargestellt. Chancen, Grenzen und Herausforderungen werden erläutert.Die theoretischen Grundlagen für die Ermittlung des erforderlichen Schlammalters bei einstufigen Schlammfaulanlagen im mesophilen Bereich werden erläutert. Dabei hat sich gezeigt, dass bei der Bemessung neben theoretischen Grundlagen auch Praxiserfahrungen unabdingbar sind, um einen stabilen Betrieb und einen guten Stabilisierungsgrad zu gewährleisten.In der Faulung kommt es zur Rücklösung von Stickstoff und Phosphor, die mit steigendem Trockensubstanzgehalt größer wird. Der freigesetzte Stickstoff dissoziiert in Abhängigkeit von pH-Wert und Temperatur zu Ammoniak und Ammonium. Das Ammonium erhöht mit Hydrogencarbonat die Pufferkapazität, sodass der pH-Wert stabilisiert wird und etwas steigt. Je höherder pH-Wert, desto größer ist die Gefahr kristalliner Ausfällungen an Phosphor (hauptsächlich als MAP), die sich im Schlamm oder als Anlagerung, z.B. an Rohrleitungen wieder finden, wo diese Probleme bereiten können.Organische Säuren und Schwefelwasserstoff dissoziieren mehr, je höher der pH-Wert ist. Da vor allem deren undissoziierte Anteile hemmend auf die Methanbakterien wirken, ist die Erhöhung des pH-Wertes in diesem Zusammenhang günstig. Beim Ammoniak verhält es sich umgekehrt, da hier ein Anstieg des pH-Werts das Verhältnis von Ammonium/Ammoniak zum giftigen Ammoniak verschiebt. Bleibt der pH-Wert stabil, ist dieses Problem nicht latent