Polycyclic aromatic hydrocarbons (PAHs) are hydrophobic organic contaminants that can pollute aquatic and terrestrial species. Due to their mutagenic or carcinogenic properties, 16 PAHs have been classified as priority environmental pollutants by the Environmental Protection Agency (EPA) of the United States. Thus, the determination of these compounds at trace levels in water samples is of utmost importance. Methods: In this work, a magnet-integrated fabric phase sorptive extraction (MI-FPSE) protocol was developed and combined with gas chromatography-tandem mass spectrometry (GC-MS/MS). MI-FPSE is a recently introduced sample preparation approach that integrates the stirring and extraction mechanisms into a single sample preparation device. The main parameters that affect the performance of the MI-FPSE procedure were studied and the analytical method was validated and used for real sample analysis. Results: Sol-gel poly(tetrahydrofuran) MI-FPSE media provided the highest extraction efficiency towards the majority of the target analytes. Under optimum conditions, the LOQs for the target analytes were down to 0.01 μg L-1. Moreover, the sol-gel coated MI-FPSE membranes were found to be reusable in accordance with the requirements of green sample preparation. Conclusions: The MI-FPSE method exhibited good accuracy and precision, wide linear range, and sensitivity. Among the benefits of this procedure are its operational simplicity, high sample throughput, and rapid extraction kinetics. The overall protocol exhibited good method applicability and green merits. Thus, MI-FPSE serves as a highly versatile “all-in-one” technique for the determination of pollutants in environmental samples.