Diese Arbeit zeigt die anhand einer Laboranlage getätigten Untersuchungen zur Reduktion von Partikelemmision durch eine elektrisch unterstütze Filtration. Die Laboranlage lässt sich in zwei Einheiten unterteilen. Die erste Einheit, die elektrischer Einheit, dient zur Partikel-vorabscheidung, -aufladung und -agglomeration. Die zweite Einheit, die Abreinigungsfiltereinheit, sollte vor allem die in den Feinstaubbereich reichenden Partikel reduzieren und damit die Reingaskonzentration auf ein Minimum senken. Für die Untersuchungen stand ein modifizierter Filtermittelprüfstand (VDI 3926 type 2) zur Verfügung. Umgesetzt wurde dies durch die Variation der verschiedenen Aufladungsarten und Filtrationsgeschwindigkeiten bei Nadelfilzen und Membranfiltern. Die Aufgabe war, aus der Variation dieser Parameter den Restdruckverlauf, die Dauer der Zyklen sowie die Partikelanzahl im Reingas zu untersuchen und auszuwerten. Um die Daten bezüglich ihrer Vorteile zu bewerten, wurden alle Versuche auch ohne Aufladung durchgeführt um auswertbare Referenzwerte zu bekommen.
de
This work shows the investigations on a laboratory plant of the reduction of particle emissions by electrically enhanced filtration. The laboratory system can be divided into two units. The first unit , the electrical unit is used for particle pre-separation , static - and - agglomeration . The second unit, the cleanable filter should reduce all the fine dust particles in the particulate matter area. For these investigations was a modified filter apparatus (VDI 3926 type 2) available. This was done by varying the different types of charging, filtration velocity with needle felts and membrane filters. The job was to analyze the residual pressure drop, the cycle's time and the number of particles in the clean gas. To evaluate the data in terms of their advantages, all tests were also performed without charging to get evaluated reference values.
en
Additional information:
Abweichender Titel laut Übersetzung der Verfasserin/des Verfassers