|
| | Preview | Author(s) | Title | Type | Issue Date |
| 1 |  | Führer, Markus ; Zamberger, Sabine ; Shan, Yao ; Helml, Lukas ; Srikakulapu, Kiranbabu ; Schnitzer, Ronald ; Kozeschnik, Ernst ; Povoden-Karadeniz, Erwin | Influence of boron grain boundary segregation on the results of thermodynamic calculations in the Fe-C-B-N system | Article Artikel    | Jun-2026 |
| 2 | | Borges, D.F.L. ; Silva, R.O. ; Carneiro, I.S.F. ; Morais, N.W.S. ; Sommer, R.L. ; Huaman, N.R. Checca ; Uggowitzer, P.J. ; Kozeschnik, Ernst ; Djukic, M.B. ; Fichtner, P.F.P. ; Schön, C.G. ; Tunes, M.A. | Low-energy proton implantation reveals the incipience of hydrogen embrittlement in a martensitic steel | Article Artikel | 1-May-2026 |
| 3 |  | Hirle, Anna Viktoria ; Hahn, Rainer ; Wojcik, Tomasz ; Kutrowatz, P. ; Salvadores Farran, N. ; Ntemou, E. ; Primetzhofer, D. ; Kolozsvári, S. ; Polcik, P. ; Jerg, C. ; Eriksson, A.O. ; Riedl-Tragenreif, Helmut | Synergistic effects of Ta and Si alloying on the long-term oxidation resistance of Ti₁₋ₓAlₓN coatings | Article Artikel | 1-May-2026 |
| 4 | | Behrangi, Sahand ; Hahn, Rainer ; Kutrowatz, Philip ; Schwarz, Sabine ; Bursikova, Vilma ; Pavel Souček ; Riedl, Helmut ; Vašina, Petr | Microcantilever-assessed fracture toughness of industrially deposited TiZrN coatings at various nitrogen partial pressures | Article Artikel | May-2026 |
| 5 | | Fitzka, Markus ; Simon, Zoltán ; Marischler, Michael ; Koch, Thomas ; Klitni, Viktor ; Fröhlich, Angelika ; Plengorth, Andreas ; Girolamo, Donato ; Rohr, Thomas ; Scheerer, Michael ; Liska, Robert ; Knaack, Patrick | Rapid, Energy-Efficient CFRP manufacturing via filament winding of frontal polymerization resins | Article Artikel | Apr-2026 |
| 6 |  | Pölzlberger, Daniel ; Salvadores Farran, Norma ; Wojcik, Tomasz ; Kutrowatz, Philip ; Hahn, Rainer ; Ntemou, Eleni ; Primetzhofer, Daniel ; Gachot, Carsten ; Riedl, Helmut | Temperature-driven self-lubrication in TiB2±x coatings via boron oxide formation | Article Artikel | Apr-2026 |
| 7 |  | Hirle, Anna Viktoria ; Bahr, Ahmed ; Wojcik, Tomasz ; Kutrowatz, P. ; Seltsam, J. ; Felfer, P. ; Kolozsvari, S. ; Polcik, P. ; Boebel, K. ; Riedl-Tragenreif, Helmut ; Hahn, Rainer | Influence of silicon containing phases on the high-temperature fracture behavior of Ti-based diborides | Article Artikel | Apr-2026 |
| 8 |  | Ulloa‐Fernández, Andrea ; Markovic, Marica ; Fernández-Pérez, Julia ; Stary, Georg ; Ovsianikov, Aleksandr | Advances in Bioprinting to Model Immune‐Mediated Skin Diseases | Article Artikel | 6-Mar-2026 |
| 9 |  | Li, Ya ; Kahlenberg, Robert ; Retzl, Philipp ; Kozeschnik, Ernst | Thermal and athermal nucleation of MgSi co-clusters in Al-Mg-Si alloys | Article Artikel | 1-Mar-2026 |
| 10 | | Vrána, Lukáš ; Gutschka, Christian ; Fekete, Matej ; Czigány, Zsolt ; Riedl, Helmut ; Pitoňáková, Tatiana ; Balázsi, Katalin ; Souček, Pavel | Microstructural tailoring of Cr–Mn–Mo Nitrides through Si and Y alloying | Article Artikel | 15-Feb-2026 |
| 11 | | Enzlberger, Ludwig ; Schmid, Barbara ; Mitterhuber-Gressl, L. ; Wojcik, T. ; Kolozsvári, S. ; Mayrhofer, P.H. | Retaining crystallinity of as-deposited thermoelectric Fe₂VAl-based thin films grown from DCMS and HiPIMS | Article Artikel | 15-Feb-2026 |
| 12 | | Werner-Hörmann, Jakob ; Smith, Jakob ; Koch, Thomas ; Weinberger, Peter | Glass Fiber Reinforced Ca(OH)2 Pellets for High-Temperature Heat Storage Applications | Presentation Vortrag | 11-Feb-2026 |
| 13 |  | Li, Ya ; Kahlenberg, Robert ; Retzl, Philipp ; Shan, Yao V. ; Du, Yong ; Kozeschnik, Ernst | Impact of atomic couples and pairs on quenched-in vacancies in Al-Mg-Si-Cu alloys | Article Artikel | 15-Jan-2026 |
| 14 | | Lorentzon, Marcus ; Takata, Naoki ; Depla, Diederik ; Zhu, Tianqi ; Greczynski, Grzegorz ; Hahn, Rainer ; Zubayer, Anton ; Palisaitis, Justinas ; Riedl, Helmut ; Kim, Dasom ; Hultman, Lars ; Birch, Jens ; Ghafoor, Naureen | Growth mechanisms and mechanical response of 3D superstructured cubic and hexagonal Hf₁₋ₓAlₓN thin films | Article Artikel | 1-Jan-2026 |
| 15 | | Hajas, Balint ; Kretschmer, Andreas ; Schmid, Barbara ; Primetzhofer, Daniel ; Ntemou, Eleni ; Kolozsvári, Szilard ; Mayrhofer, Paul Heinz ; Kirnbauer, Alexander | Mechanical properties and thermal stability of refractory metal-alloyed (Al,V)N-based high-entropy nitrides and oxynitrides | Article Artikel | 1-Jan-2026 |
| 16 | | Lipp, Anna-Maria ; Schlossnikl, Jessica ; Gentgen, Isabelle ; Koch, Thomas ; Archodoulaki, Vasiliki-Maria ; Lederer, Jakob | Recycling rigid polypropylene from mixed waste: Does the origin affect mechanical recyclate quality? | Article Artikel | Jan-2026 |
| 17 | | Balasubramanian, Rathina Vel ; Muerner, Marcia ; Grad, Sibylle ; Fernández-Pérez, Julia ; Ovsianikov, Aleksandr | Nucleus pulposus-like scaffolded spheroid for intervertebral disc regeneration | Presentation Vortrag | Jan-2026 |
| 18 | | Lorentzon, Marcus ; Hahn, Rainer ; Palisaitis, Justinas ; Riedl, Helmut ; Hultman, Lars ; Birch, Jens ; Ghafoor, Naureen | Three-fold superstructured superlattice HfN/HfAlN thin films for improved damage tolerance | Article Artikel | Jan-2026 |
| 19 |  | Kahlenberg, Robert ; Falkinger, Georg ; Schuster, Roman ; Miesenberger, Bernhard ; García Arango, Nicolás ; Maawad, Emad ; Povoden-Karadeniz, Erwin ; Milkereit, Benjamin ; Kozeschnik, Ernst | Deconvolution of superimposing reaction signals from DSC curves in selected Al-Mg-Si-(Cu) alloys by mean-field modeling and HEXRD | Article Artikel | Jan-2026 |
| 20 | | Baltzaki, Maria Chrysi Izampella ; Fernández-Pérez, Julia ; Reichsöllner, Raffael ; Slezak, Paul ; Redl, Heinz ; Baudis, Stefan | From One Polymer to Many Functions: A PVA-Based Toolbox for Tissue Engineering | Presentation Vortrag | Jan-2026 |
| 21 | | Allaire, Antoine ; Vogric, Marko ; Wojcik, Tomasz ; Presoly, Peter ; Jacob, Aurélie | Experimental Investigation of Bainite Microstructure in Fe-C | Article Artikel | 2026 |
| 22 |  | Nistler, Sarah | 3D-printed ceramic hybrid materials | Thesis Hochschulschrift  | 2026 |
| 23 |  | Amini, Ehsan | Manufacturing, Microstructure Characterization, and Tensile Testing of Additively Manufactured SS316L: Investigating Strength, Anisotropy, and Fracture Behavior | Thesis Hochschulschrift | 2026 |
| 24 |  | Altaf, Muhammad Awais | Development of High-Entropy Carbides Thin Films via DC Magnetron Sputtering | Thesis Hochschulschrift | 2026 |
| 25 |  | Enzlberger, Ludwig | Structure-property relatioins of diborides and thermoelectric thin film materials | Thesis Hochschulschrift | 2026 |
| 26 |  | Bichler, Lorenz Pinkas | Reducing Diversity in Lightweight Packaging – Implications for Current Recycling Practice | Thesis Hochschulschrift | 2026 |
| 27 |  | Baschmakov, Katharina | Tissue engineering using scaffolded spheroids in custom designed microchips | Thesis Hochschulschrift | 2026 |
| 28 |  | Ahmadi, Mojtaba | Fracture mechanical analysis of heterogeneous photopolymers for additive manufacturing | Thesis Hochschulschrift | 2026 |
| 29 |  | Hirle, Anna Viktoria | New Advances on the Thermo-Mechanical Properties of Protective Ceramic Coatings | Thesis Hochschulschrift | 2026 |
| 30 |  | Garcia Arango, Nicolas | Investigation of intermetallic phases in thermally treated Al 6xxx alloys | Thesis Hochschulschrift | 2026 |
| 31 |  | Khalil, Umar Bin | Design and Development of the Build Platform in a Bio-3D Printer | Thesis Hochschulschrift | 2026 |
| 32 |  | Afsharipour, Amirhossein | Investigation of the effect of resin viscosity on the thermomechanical properties of 3D-printed composites | Thesis Hochschulschrift | 2026 |
| 33 |  | Idrees, Muhammad Muzammil | Comparative analysis between traditional topology optimization and lattice structure optimization for additive manufacturing | Thesis Hochschulschrift | 2026 |
| 34 |  | Eidelpes, Constantin | Automating thin film micromechanical test specimen fabrication | Thesis Hochschulschrift | 2026 |
| 35 | | Bichler, Lorenz Pinkas ; Koch, Thomas ; Krempl, Nina ; Archodoulaki, Vasiliki-Maria | One step closer to circularity: recycling post-consumer PE-HD into shampoo bottles | Article Artikel | 29-Dec-2025 |
| 36 |  | Altaf, Muhammad Awais ; Hajas, Balint Istvan ; Kolozsvári, Szilárd ; Kirnbauer, Alexander ; Mayrhofer, Paul Heinz | Si-modified high-entropy (Hf, Ta, Ti, V, Zr) carbide coatings: Oxidation resistance and scale integrity | Article Artikel | 15-Dec-2025 |
| 37 | | García Arango, Nicolás ; Schuster, Roman ; Kahlenberg, Robert ; Timm, Philipp ; Helml, Lukas ; Retzl, Philipp ; Stark, Andreas ; Povoden-Karadeniz, Erwin | In-situ HEXRD study on the β→α transformation in Al alloy EN AW-6063 | Article Artikel | 5-Dec-2025 |
| 38 | | Kroiss, Franz ; Varga, Markus ; Rojacz, Harald ; Gachot, Carsten | Influence of High‐Pressure Grinding Parameters on Surface Topography and Microstructure | Article Artikel | 3-Dec-2025 |
| 39 | | Enzlberger, Ludwig ; Kirnbauer, Alexander ; Astecker, Thomas ; Wojcik, T. ; Podsednik, Maximilian ; Limbeck, Andreas ; Kolozsvári, Szilard ; Mayrhofer, P.H. | Tuning microstructure and mechanical properties in superstoichiometric to substoichiometric TiB₂ thin films: a DCMS and HiPIMS study | Article Artikel | 1-Dec-2025 |
| 40 | | Lin, Shuyao ; Holec, David ; Sangiovanni, Davide G. ; Leiner, Thomas ; Hultman, Lars ; Mayrhofer, Paul H. ; Koutna, Nikola | Shear-activated phase transformations of diborides via machine-learning potential molecular dynamics | Article Artikel | 1-Dec-2025 |
| 41 | | Lin, Shuyao ; Chen, Zhuo ; Janknecht, Rebecca ; Zhang, Zaoli ; Hultman, Lars ; Mayrhofer, Paul H. ; Koutna, Nikola ; Sangiovanni, Davide G. | Machine-learning potentials predict orientation- and mode-dependent fracture in refractory diborides | Article Artikel | 1-Dec-2025 |
| 42 |  | Pölzlberger, Daniel ; Gachot, Carsten ; Grützmacher, Philipp G. ; Schwarz, Sabine ; Riedl, Helmut ; Yan, Zhen ; Sui, Xudong | Influence of the gas atmosphere on the in‑situ formation of low‑friction Molybdenum and Tungsten diselenides | Article Artikel | Dec-2025 |
| 43 | | Salvadores Farran, N. ; Huber, Tobias Martin ; Wojcik, Tomasz ; Gies, A. ; Ramm, J. ; Kolozsvári, S. ; Polcik, P. ; Stöger-Pollach, Michael ; Rath, Jakob ; Fleig, Jürgen ; Riedl-Tragenreif, Helmut | Unprecedented high-temperature electrical insulation of reactively sputtered AlN thin films | Article Artikel | Dec-2025 |
| 44 |  | Hirle, Anna Viktoria ; Fuger, Christoph ; Wojcik, Tomasz ; Kutrowatz, P. ; Davydok, Anton ; Kolozsvári, Szilard ; Polcik, Peter ; Boebel, Klaus ; Riedl-Tragenreif, Helmut ; Hahn, Rainer | Anisotropic hardness in TiB2±z thin films via depth-resolved crystallographic texture engineering | Article Artikel | Dec-2025 |
| 45 | | Stampfl, Jürgen | Lithography-Based Additive Manufacturing for Biomedical Engineering | Presentation Vortrag | 28-Nov-2025 |
| 46 | | Rückeshäuser, Phillip ; Wojcik, Tomasz ; Riedl-Tragenreif, Helmut | Advanced Engineering of Hydrogen Barrier Coatings | Presentation Vortrag | 25-Nov-2025 |
| 47 | | Pitthan, E. ; Gautam, D. ; Primetzhofer, D. ; Petersson, P. ; Rubel, M. ; Fellinger, M. ; Gurschl, Raphael Markus ; Burazor Domazet, Benjamin ; Brötzner, Johannes ; Aumayr, Friedrich ; Pölzlberger, Daniel Erich ; Riedl-Tragenreif, Helmut ; Albergel, C. ; Mofrad, N.F. ; Sand, A. | Impact of boron intermixing on W-based PFCs: Atomic, structural and mechanical characteristics | Presentation Vortrag | 21-Nov-2025 |
| 48 | | Pölzlberger, Daniel Erich ; Salvadores Farran, Norma ; Geiger, Jakob ; Fuchs, Dominik ; Wojcik, Tomasz ; Kutrowatz, Philip ; Ntemou, Eleni ; Primetzhofer, Daniel ; Gachot, Carsten ; Riedl-Tragenreif, Helmut | Investigation of solid self-lubrication mechanisms of B2O3 in TiB2±z and WB2±z based thin films | Presentation Vortrag | 20-Nov-2025 |
| 49 |  | Gurmann, Tina ; Krauß, Judith ; Ammann, Theresa ; Koch, Thomas ; Frauenlob, Martin ; Liska, Robert ; Baudis, Stefan | Cleavable silyl ether monomers with elevated thermomechanical properties for bone regeneration | Article Artikel | 17-Nov-2025 |
| 50 |  | Lotfi-khojasteh, Erfan ; Elmkhah, Hassan ; Nouri, Meisam ; Atapour, Masoud ; Lin, Naiming ; Mayrhofer, Paul Heinz | Effects of post-annealing treatment on the tribological and electrochemical properties of (Ti,Al,Cr,Si,Zr)N coated steels | Article Artikel | 15-Nov-2025 |
| 51 |  | Sgarz, Philip ; Seisenbacher, Simon ; Koch, Thomas ; Baudis, Stefan | Electrospinning of thermoplastic polyurethane(urea) elastomers for vascular grafts | Presentation Vortrag | 14-Nov-2025 |
| 52 | | Vidiš, Marek ; Fiantok, Tomáš ; Truchly, Martin ; Izai, Vitalii ; Roch, Tomáš ; Satrapinskyy, Leonid ; Hahn, Rainer ; Riedl, Helmut ; Svec, Peter ; Šroba, Viktor ; Mikula, Marián | Enhanced hardness and fracture toughness in diboride superlattice films: Ab initio and experimental study | Article Artikel | 1-Nov-2025 |
| 53 | | Angloher, G. ; Casadei, F. ; Cipelli, E. ; Canonica, L. ; Dominsky, F. ; Hauff, D. ; Langenkämper, A. ; Mancuso, M. ; Mauri, B. ; Moore, C. ; Petricca, F. ; Pröbst, F. ; Schäffner, K. ; Stahlberg, M. ; Stodolsky, L. ; Zanirato, M. ; Bento, A. ; Di Lorenzo, S. ; Fuchs, Dominik ; Banik, S. ; Einfalt, L. ; Reindl, Florian ; Schieck, J. ; Schwertner, C. ; Valdenaire, Danae Danielle ; Palušovà, V. | Observation of a low energy nuclear recoil peak in the neutron calibration data of an Al₂O₃ crystal in CRESST-III | Article Artikel | 1-Nov-2025 |
| 54 | | Gassner, Anika ; Eder, Gabriele C. ; Özkalay, Ebrar ; Friesen, Gabi ; Feichtner, Markus ; Archodoulaki, Vasiliki-Maria | Enhanced mechanical load testing of photovoltaic modules for cold and snowy climates | Article Artikel | Nov-2025 |
| 55 | | Musil, Vojtěch ; Laa, Dominik ; Sokolohorskyj, Anatolij ; Liska, Robert ; Ehrmann, Katharina ; Merna, Jan | Epoxide-functionalized hyperbranched polyethylene and its applications in functional polymer synthesis and hot lithography photopolymer toughening | Article Artikel | Nov-2025 |
| 56 |  | Neves, José L. ; Wojcik, Tomasz ; Obersteiner, David ; Grillitsch, Johann ; Holec, David ; Kiener, Daniel ; Klein, Thomas | Wire-Arc directed energy deposition of metastable-β alloy Ti-15V-3Cr-3Sn-3Al using thick wire feedstock: Microstructure and mechanical response | Article Artikel | Nov-2025 |
| 57 | | Schmidt, Thomas ; Chalupa-Gantner, Franziska ; Markovic, Marica ; Liska, Robert ; Ovsianikov, Aleksandr ; Baudis, Stefan | Development and application of dye-based diazosulfonates as water-soluble two-photon photoinitiators under the aspect of biofabrication | Presentation Vortrag | 29-Oct-2025 |
| 58 | | Mayrhofer, Paul Heinz | Materials science-based guidelines to develop robust hard coatings | Presentation Vortrag | 27-Oct-2025 |
| 59 | | Yue,Jincheng ; Zheng, Jiongzhi ; Shen, Xingchen ; Maji, Krishnendu ; Yang, Chun-Chuen ; Lin, Shuyao ; Lemoine, Pierric ; Guilmeau, Emmanuel ; Liu, Yanhui ; Cui, Tian | Diffuson-Dominated Thermal Transport Crossover From Ordered to Liquid-Like Cu₃BiS₃: The Negligible Role of Ion Hopping | Article Artikel | 23-Oct-2025 |
| 60 | | Stampfl, Jürgen | Planning, printing, post-processing: Optimizing microstructures of 3D-printed ceramics and polymers | Presentation Vortrag | 22-Oct-2025 |
| 61 | | Hager, Florian Christoph ; Bornemann, Jan ; Laa, Dominik ; Stampfl, Jürgen | Characterization of Lithography-Based Additive-Manufactured Glass Fiber Composites | Presentation Vortrag | 16-Oct-2025 |
| 62 | | Göschl, Michael ; Laa, Dominik ; Koch, Thomas ; Constable, Evan ; Liu, Xin ; Pimenov, Andrei ; Stampfl, Jürgen ; Liska, Robert ; Ehrmann, Katharina | Semi-crystalline and amorphous materials via multi-temperature 3D printing from one formulation | Article Artikel | 15-Oct-2025 |
| 63 |  | Altaf, Muhammad Awais ; Hajas, Balint Istvan ; Kolozsvári, Szilárd ; Wojcik, Tomasz ; Kirnbauer, Alexander ; Mayrhofer, Paul Heinz | Influence of Si on structure, mechanical properties, and thermal stability of reactively and non-reactively sputtered high-entropy (Hf,Ta,Ti,V,Zr) carbides | Article Artikel | 15-Oct-2025 |
| 64 |  | Kretschmer, Andreas ; Kirnbauer, Alexander ; Frost, R.J.W. ; Primetzhofer, D. ; Hans, Marcus ; Schneider, J.M. ; Schuster, R. ; Mayrhofer, Paul H. | Unprecedented B solubility in cubic (Hf,Ta,Ti,V,Zr)B-C-N coatings | Article Artikel | 15-Oct-2025 |
| 65 | | Riedl-Tragenreif, Helmut | The Hotter, the Better – Mikrometer Schichten für maximale Leistungsfähigkeit | Presentation Vortrag | 8-Oct-2025 |
| 66 | | Depope, Nika ; Depope, Al ; Archodoulaki, Vasiliki-Maria ; Ipsmiller, Wolfgang ; Bartl, Andreas | Deep eutectic solvent as a solution for polyester/cotton textile recycling | Article Artikel | 8-Oct-2025 |
| 67 | | Retzl, Philipp ; Kozeschnik, Ernst ; Ott, Bernd Reiner | Decomposition of carbide-free bainite during prolonged holding at bainite transformation temperatures | Inproceedings Konferenzbeitrag | 2-Oct-2025 |
| 68 | | Giannopoulos, Dimosthenis ; Schlittler, Maja ; De Bortoli, Marzia ; Coppini, Raffaele ; Petrovic, Mina ; Cerbai, Elisabetta ; Schütz, Gerhard ; Thurner, Philipp J. ; Rossini, Alessandra ; Andriotis, Orestis G. | Altered Viscoelasticity of Cell Spheroids in Hypertrophic Cardiomyopathy | Presentation Vortrag | 1-Oct-2025 |
| 69 | | Fernández-Pérez, Julia | Exploring light-based biofabrication of norbornene-functionalized polymers for recreation of cell microenvironments | Presentation Vortrag | 26-Sep-2025 |
| 70 | | Laa, Dominik ; Stampfl, Jürgen | Voxel-level modelling for stereolithography 3D printing | Presentation Vortrag | 25-Sep-2025 |
| 71 | | Gassner, Anika ; Eder, Gabriele C. ; Özkalay, Ebrar ; Friesen, Gabi ; Feichtner, Markus ; Archodoulaki, Vasiliki-Maria | Enhanced Mechanical Load Testing of PV Modules for Cold and Snowy Climates | Presentation Vortrag | 25-Sep-2025 |
| 72 | | Ecker, Jakob ; Koch, Thomas ; Liska, Robert ; Stampfl, Jürgen | Impact of layer adhesion on the (thermo)mechanical properties of 3D printed multi-material parts for easily disassemblable compounds | Presentation Vortrag | 24-Sep-2025 |
| 73 | | Helml, Lukas ; Maier, Severin ; Wlanis, Thomas ; Artner, Werner ; Kahlenberg, Robert ; Fuchs, Georg ; Kozeschnik, Ernst | Simulation of Residual Stress during the Heat Treatment in Cast Aluminum | Presentation Vortrag | 23-Sep-2025 |
| 74 | | Hager, Florian Christoph ; Laa, Dominik ; Bornemann, Jan ; Stampfl, Jürgen | Fiber-Reinforced Photopolymers - Additive Manufacturing of High Performance Composites | Presentation Vortrag | 18-Sep-2025 |
| 75 | | Bornemann, Jan ; Laa, Dominik ; Hager, Florian Christoph ; Stampfl, Jürgen | Continuous Fiber Reinforcing Lithography-based Additive Manufacturing | Presentation Vortrag | 18-Sep-2025 |
| 76 | | Laa, Dominik ; Göschl, Michael ; Ehrmann, Katharina ; Stampfl, Jürgen | Voxel-level control in stereolithography 3D printing: Achieving dual properties from a single material | Presentation Vortrag | 18-Sep-2025 |
| 77 | | Pölzlberger, Daniel Erich ; Fuchs, Dominik ; Gachot, Carsten ; Riedl-Tragenreif, Helmut | Influence of Mo on the mechanical and tribological properties of DCMS deposited Ti1-xMoxB2+z thin films | Presentation Vortrag | 17-Sep-2025 |
| 78 | | Schardt, Lisa ; Buchner, Valentin ; Archodoulaki, Vasiliki-Maria | Yoghurt Cups to Tire Wear: Investigating Secondary Microplastic Generation | Presentation Vortrag | 17-Sep-2025 |
| 79 | | Kirnbauer, Alexander ; Peck, Erwin ; Hajas, Balint ; Kolozsvári, Szilard ; Polcik, Peter ; Mayrhofer, Paul Heinz | Phase formation and properties of high-entropy silicide coatings | Presentation Vortrag | 17-Sep-2025 |
| 80 | | Mayrhofer, Paul Heinz | Materials science-based guidelines to develop robust hard thin film materials | Presentation Vortrag | 17-Sep-2025 |
| 81 |  | Schandl, Stephan ; Osondu-Chuka, Goodness ; Durand-Chatton, Gwendal ; Lemaire, Laurent ; Franconi, Florence ; Sedivy, Arthur ; Reimhult, Erik ; Ovsianikov, Aleksandr | Synthetically acetylated alginate is a superior in vitro biofilm model for antibiotic testing showing reduced tobramycin affinity | Article Artikel | 17-Sep-2025 |
| 82 | | Helml, Lukas ; Maier, Severin ; Wlanis, Thomas ; Artner, Werner ; Kahlenberg, Robert ; Fuchs, Georg ; Kozeschnik, Ernst | Residual Stress Analysis for Aluminum Cast Alloys | Presentation Vortrag | 17-Sep-2025 |
| 83 | | Führer, Markus ; Zamberger, Sabine ; Povoden-Karadeniz, Erwin | Influence of Nitride-forming Elements Al, B, and Ti on the Kinetics of Austenite Grain Growth in Microalloyed Steel | Presentation Vortrag | 17-Sep-2025 |
| 84 | | Gutschka, Christian ; Zauner, Lukas ; Glechner, T. ; Holec, David ; Riedl-Tragenreif, Helmut | First principles investigations of metastable group IV transition metal diboride solid solutions | Presentation Vortrag | 17-Sep-2025 |
| 85 | | Enzlberger, Ludwig ; Kirnbauer, Alexander ; Astecker, Thomas ; Wojcik, Tomasz ; Podsednik, Maximilian ; Limbeck, Andreas ; Kolozsvári, Szilard ; Mayrhofer, Paul Heinz | Impact of the B/Ti-ratio on microstructure and mechanical properties of DCMS- and HiPIMS TiB₂₊₋z thin films | Presentation Vortrag | 16-Sep-2025 |
| 86 | | Salvadores Farran, Norma ; Scholz, Florentine ; Wojcik, Tomasz ; Jerg, Carmen ; Gies, Astrid ; Ramm, Jürgen ; Böbel, Klaus ; Kolozsvári, Szilard ; Polcik, Peter ; Huber, Tobias M. ; Fleig, Jürgen ; Riedl-Tragenreif, Helmut | Amorphous Al₂O₃ Thin Films: The Influence of Alloying Elements on Dielectric Properties at High Temperatures | Presentation Vortrag | 16-Sep-2025 |
| 87 | | Rückeshäuser, Phillip ; Kolozsvári, S. ; Polcik, P. ; Stelzig, T. ; Boebel, K. ; Riedl-Tragenreif, Helmut | Assessing hydrogen diffusion in ceramic PVD coating materials | Presentation Vortrag | 16-Sep-2025 |
| 88 | | Krejci, Anna Lena ; Schöngruber, Thomas ; Kozeschnik, Ernst | Modeling Strain Hardening in Al Alloys: Effects of Solutes and Microstructure Across Binary and Technical Alloy Systems | Presentation Vortrag | 15-Sep-2025 |
| 89 | | Gutschka, Christian ; Richter, Sophie ; Hahn, Rainer ; Wojcik, Tomasz ; Ntemou, Eleni ; Primetzhofer, Daniel ; Kolozsvári, Szilard ; Polcik, P ; Jerg, Carmen ; Ramm, J. ; Riedl-Tragenreif, Helmut | Correlation of ab initio methods with experimental phase exploration of TM-Al/Si-C thin film materials | Presentation Vortrag | 15-Sep-2025 |
| 90 | | Salvadores Farran, Norma ; Wojcik, Tomasz ; Jerg, Carmen ; Gies, Astrid ; Ramm, Jürgen ; Kolozsvári, Szilard ; Polcik, Peter ; Huber, Tobias M. ; Fleig, Jürgen ; Riedl-Tragenreif, Helmut | Electrical insulation properties of reactive grown AlN thin films at high-temperatures | Presentation Vortrag | 15-Sep-2025 |
| 91 | | Weiss, Katharina ; Mayrhofer, Paul Heinz ; Wojcik, Tomasz ; Rostami Pour, Kiana ; Koutna, Nikola | Design and Investigation of DC Magnetron Sputtered TiN/TaN superlattice structures | Presentation Vortrag | 15-Sep-2025 |
| 92 | | Pinter, Thomas ; Du, Chunhui ; Fuchs, Dominik ; Astecker, Thomas ; Wojcik, Tomasz ; Mayrhofer, Paul Heinz | TiN/TiB and NbC/TiB superlattice thin films via multi-cathode DC magnetron sputtering | Presentation Vortrag | 15-Sep-2025 |
| 93 | | Pölzlberger, Daniel Erich ; Hahn, Rainer ; Wojcik, Tomasz ; Salvadores Farran, Norma ; Ntemou, Eleni ; Primetzhofer, Daniel ; Geiger, Jakob ; Gachot, Carsten ; Riedl-Tragenreif, Helmut | Unravelling solid self-lubrication mechanisms of B2O3 in TiB2±z and WB2±z based thin films | Presentation Vortrag | 15-Sep-2025 |
| 94 | | Rückeshäuser, Phillip ; Koloszvari, S. ; Polcik, P. ; Stelzig, T. ; Boebel, K. ; Riedl-Tragenreif, Helmut | Assessing Hydrogen diffusion in protective coating materials | Presentation Vortrag | 11-Sep-2025 |
| 95 | | Gitschthaler, Arno ; Hudak, Oliver E. ; Hahn, Rainer ; Wojcik, Tomasz ; Huber, Felix ; Pahr, Dieter H. ; Fuchs, Dominik ; Stelzig, Timea ; Hitaishi, Vivek ; Kolozsvári, Szilard ; Polcik, Peter ; Riedl-Tragenreif, Helmut | Evaluating thin Pt protection coatings for Ti BPPs in PEMWE | Presentation Vortrag | 8-Sep-2025 |
| 96 | | Scholz, Florentine ; Hemetsberger, Jakob ; Laudani, Francesco ; Rath, Jakob ; Sauer, Markus ; Fahrnberger, Florian ; Hahn, Michael ; Hutter, Herbert ; Gies, Astrid ; Kolozsvári, Szilard ; Salvadores Farran, Norma ; Foelske, Annette ; Riedl-Tragenreif, Helmut | Usage of advanced analytical techniques assessing the influence of Si on the stabilization of amorphous Al2O3-based thin films | Presentation Vortrag | 7-Sep-2025 |
| 97 | | Nistler, Sarah ; Wojcik, Tomasz ; Baudis, Stefan ; Schwentenwein, Martin ; Stampfl, Jürgen | Two-component Hybrid Bioceramic Implants Using Sinter-joining | Presentation Vortrag | 2-Sep-2025 |
| 98 |  | Musil, Vojtěch ; Laa, Dominik ; Ahmadi, Mojtaba ; Stampfl, Jürgen ; Liska, Robert ; Merna, Jan ; Ehrmann, Katharina | Thermoplastic-like mechanical performance of heterogeneous photopolymers for additive manufacturing with tailored hyperbranched rubbers | Article Artikel | 1-Sep-2025 |
| 99 | | Gitschthaler, A. ; Hahn, R. ; Zauner, L. ; Wojcik, T. ; Fahrnberger, F. ; Hutter, H. ; Davydok, A. ; Krywka, C. ; Jerg, C. ; Ramm, J. ; Eriksson, A. ; Kolozsvári, S. ; Polcik, P. ; Riedl, H. | Enhancing the high-cycle fatigue strength of Ti-Al-N coated Ti-6Al-4V by residual stress design | Article Artikel | Sep-2025 |
| 100 | | Deger, Simon N. ; Mauri, Anna ; Cui, Yang ; Weishäupl, Sebastian J. ; Özdemir, Ali Deniz ; Syed, Hamad ; Ovsianikov, Aleksandr ; Wenzel, Wolfgang ; Pöthig, Alexander ; Hauer, Jürgen ; Kozlowska, Mariana ; Fischer, Roland Augustinus | Intermolecular Interactions as Driving Force of Increasing Multiphoton Absorption in a Perylene Diimide‐Based Coordination Polymer | Article Artikel | Sep-2025 |
